Digitrax Zephyer Express Starter Kit.
Zephyr Express Set Includes:
- DCS52 All-In-One Throttle/Command Station/Booster to run your layout
- PS314 Power supply to provide power to run your DCS52
- Zephyr Express Quickstart Guide
- Zephyr Express Manual
- Digitrax Decoder Manual
Zephyr Express Offers:
- Cost effective entry level LocoNet Compatible system
- Color 2.4” LCD Screen.
- Large Backlit Keypad.
- Speed control knob and direction switch with brake.
- Integrated USB Computer Interface
- Easy 2 and 4 digit addressing.
- Smooth speed control.
Run multiple trains at once without blocking!
- Run up to 20 addresses at the same time on your system.
- Run up to 20 throttles at the same time on your system.
Jump Ports for using DC power packs as additional throttles
- Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
- Simple, cost effective way to add more throttles to your Zephyr Express set.
- Makes it easy to share the fun of DCC with layout visitors and young operators.
- Functions on locos controlled by Jump throttles remain active.
Over 9000 Locomotive Addresses
- Use Address 00 to run one or more locos without DCC decoders
- Two Digit Addressing is easy to use. (Address 01-127)
- Four Digit Addressing-use the number painted on your engines as its address.
3.0 Amps of Power to run multiple trains.
- Booster outputs 13V DC for safe operation in N and HO scales.
Function Control
- Control lights and sound with 29 functions (F0-F28)
- Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
- Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Stationary Decoders, Turnout Control & Turnout Position Reporting
- Access to stationary decoder control for turnouts and other devices.
- Control 2000+ stationary decoder addresses.
Consisting
- Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
- Advanced consisting, allows only advanced consist capable mobile decoders.
- Basic consisting, program decoders to run on same address.
Decoder Programming
- Built in read/write programmer that can read and write all CVs.
- Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming.
- Operations mode programming can be used to program decoders on the layout.
Expandability with Digitrax LocoNet
- Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components.
- Use Zephyr Express as an expansion set with Digitrax equipment you already have installed.
- Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles.
Comes Complete with DCS52 Command Station, PS314 Power Supply, and Decoder Tester, System Reference Manual and Decoder Manual.
